Sweeper ECO CLEAN 1200

The EcoClean sweeper is designed to remove dirt from all hardened surfaces. Is it ideally suited to sweep squares, traffic routes and parking facilities covered with paving stones, asphalt and concrete.

It can be coupled with a forklift truck, tractor or loader, permitting agricultural, gardening as well as municipal services or industrial applications. A wide range of accessories makes the machine adaptable for the requirements of the most demanding customers. The sweeper is a multi-season machine, so it can also be used for clearing snow in winter.

 

MAIN BRUSH

  • Ø 510 mm
  • MIX – a blend of polypropylene fibres and wire OR:
  • STEEL - steel wires OR:
  • PPN – polypropylene fibres
  • Spiral brushes are also available.


 RUNNING WHEELS

  • Ø 200x50 mm with solid aluminium rims
  • manually adjustable
  • standard 3rd support wheel at the front of the machine


HYDRAULIC DRIVE

  • The machine is driven by a highly efficient industrial (gerotor) engine 14 kW


FLOATING SYSTEM

  • prevents the machine from being pressed into the ground.
  • allows the machine to work smoothly on uneven terrain
  • provides perfect terrain profile copying
  • reduces the machine's failure rate


MOUNT ACCESSORIES

  • EURO frame
  • Forklift mount (forklift slots are standard in every sweeper - but special forklift mounting allows the machine to use the floating system)
  • Mounts for many loaders, e.g JCB, CAT, Merlo, Schaffer, Weidemann, Thaler, Avant, Manitou, Volvo etc.


SPRINKLING SYSTEM

  • 175 l water tank with external filter
  • Pressure pump (12/24 V)
  • Spray bar complete with flat nozzles
  • Reduction of dust emissions during operation
  • Side-brush mount option


DIRT TANK

  • Manual and hydraulic version
  • Large capacity, includes a rubber edge protection

 

SIDE BRUSH

  • Ø 650 mm
  • Can be mounted on either side
  • The customer chooses the type of brush (steel wire, polypropylene, MIX)
  • Enables precise sweeping of hard-to-reach areas, eg. curbs
  • It has a safety device that lifts the brush when an obstacle is encountered.
  • Three-way valve regulates the side brush operation

 

  FORK MOUNT

  • Enables quick coupling of the sweeper
  • Standard equipment
  • Stiff operation (no floating system)

 

HYDRAULIC WORKING ANGLE ADJUSTMENT

  • Permits the working angle to be set at 15o

 

  

STANDARD EQUIPMENT:

FLOATING SYSTEM, 3rd SUPPORT WHEEL, BODY WITH MAIN BRUSH, MAIN BRUSH OF ANY TYPE, FORK SLOT, ATTACHMENT TO HITCHES OF ANY CATEGORY

 

 

 

 

 

Type ZM-1200
Hydraulic drive Gerotomotor (industrial quality)
Min. oil flow 20-25l/min
Main brush 510 mm
Brush RPM Recommended: 100RPM. Max: 150RPM
Rotary side brush 650mm, hydraulic drive
Water spray system 175L watertank, external filter, pressure pump 12/24 V
DIMENSIONS  
Working width 1200mm
Working width (leaning 15 degrees) 1185 mm
Length 1505 mm
Length (with side brush) 1915 mm
Height 835 mm
Height (with water sprinkle system) 1195 mm
WEIGHT AND VOLUME  
Weight (without additional equipment) 220 kg
Weight of waste bin 68 kg
Dustbin volume 108 L
Weight of side brush 25 kg
Weight of sprinkle system 45 kg
Weight of waste bin (70% filled) 115 kg

Back to top