Sweeper ECO CLEAN 1500

The ECO CLEAN sweeper is designed to remove dirt from all hardened surfaces. Is it ideally suited to sweep squares, traffic routes and parking facilities covered with paving stones, asphalt and concrete.

It can be coupled with a forklift truck, tractor or loader, permitting agricultural, gardening as well as municipal services or industrial applications. A wide range of accessories makes the machine

adaptable for the requirements of even the most demanding customers. The sweeper is a multi-season machine, so it can also be used for clearing snow in winter.

 

MAIN BRUSH

  • Ø 510 mm
  • MIX – a blend of polypropylene fibres and wire
  • PPN – polypropylene fibres
  • Spiral, polypropylene


 RUNNING WHEELS

  • Ø 200x50 mm with solid aluminium rims
  • manually adjustable
  • standard 3rd support wheel at the front of the machine


HYDRAULIC DRIVE

  • The machine is driven by a highly efficient industrial (gerotor) engine 14 kW


FLOATING SYSTEM

  • prevents the machine from being pressed into the ground.
  • allows the machine to work smoothly on uneven terrain
  • provides perfect terrain profile copying
  • reduces the machine's failure rate


MOUNT ACCESSORIES

  • EURO frame
  • Mounts for small loaders, e.g Schaffer, Weidemann, Thaler, Avant, Manitou, Volvo etc.


SPRINKLING SYSTEM

  • 175 l water tank with external filter
  • Pressure pump (12/24 V)
  • Spray bar complete with flat nozzles
  • Reduction of dust emissions during operation
  • Side-brush mount option


DIRT TANK

  • Manual and hydraulic version
  • Large capacity, includes a rubber edge protection

 

SIDE BRUSH

  • Ø 650 mm
  • Can be mounted on either side
  • The customer chooses the type of brush (wire, polypropylene, MIX)
  • Enables precise sweeping of hard-to-reach areas
  • It has a safety device that lifts the brush when an obstacle is encountered.
  • 3-way valve regulates the side brush operation

 

  FORK MOUNT

  • Enables quick coupling of the sweeper
  • standard equipment
  • Rigid operation

 

HYDRAULIC WORKING ANGLE ADJUSTMENT

  • Permits the working angle to be set at 15o

 

  

STANDARD EQUIPMENT:

FLOATING SYSTEM, 3-RD SUPPORT WHEEL, BODY WITH MAIN BRUSH, MAIN BRUSH OF ANY TYPE, FORK SLOT, ATTACHMENT TO HITCHES OF ANY CATEGORY

 

 

 

 

 

 

 

 

 

 

Type ZM - 1500
Hydraulic drive 1 Gerotomotr( industrial quality)
Fluid troughput min 20-25 l / min*
Main brush Ø 510mm
Brush revolutions  recommended 100 rpm-max150 rpm/min
Rotary side brush

Ø 650 mm, hydraulic drive

Water spray system 175L watertank, external filter, volt pressure pump 12/24V
DIMENSIONS  
Working width 1500 mm
Working width(leaning 15 degrees) 1485 mm
Lenght 1805 mm
Lenght ( with side brush) 2215 mm
Height 835 mm
Height ( with sprinkle system) 1195 mm
WEIGHT AND VOLUME  
Weight ( without additional equipment) 265 kg
Weight of dustbin

75 kg

Dustbin volume

130 L

Weight of side brush

25 kg

Weight of sprinkle system 45 kg
Weight of collector( filling 70%) 137 kg

* Standard sweeping, daily (freshly deposited dirt, leaves, straw, gravel, earth) - min 20-25l / min

   Sweeping dirt medium (wet sand, wet land on the asphalt, asphalt manure) - min 27l

   Sweeping heavy impurities, for example. Uncleanness old moss in the pavement blocks, 35l min 

Back to top